Suitable for drying sand and gravel such as natural sand, manufactured sand, gravel, pebbles, crushed stone, quartz sand, etc. And sludge such as washing slurry, mine tailings, dredging mud, construction mud, stone sludge, filter cake, etc.
Recommended Solution: Rotary Dryer (require large production capacity)
Various heat sources are available, including electricity, steam, natural gas, diesel, biomass pellets, coal, firewood. If there are other heat sources, please also contact us for design. (Click each heat source to learn more about our drying solutions.)
Please watch our video here, or you can visit our YOUTUBE channel to check more.
Tip: Find comprehensive technical & commercial details on our FAQs page under the Why Choose Us menu.
Rotary Dryer
1.Description
Rotary drum dryer is one of the most traditional drying equipment. Because of its stable operation and wide application, it is widely used in metallurgy, building materials, chemical industry, agricultural and sideline products processing and other fields.
The wet material is sent to the hopper by the belt conveyor or bucket elevator and added by the feed port. The main body of the rotary drum dryer is a cylinder with slight inclination and can rotate. When the material enters into the cylinder, it is dried in direct or counter current with the hot air passing through the cylinder or in effective contact with the heated wall. After drying, the product is discharged from the lower part of the other end. In the drying process, the material moves from the higher end to the lower end under the action of gravity with the help of the slow rotation of the cylinder. The inner wall of the cylinder is equipped with a forward reading board, which constantly picks up and drinks the materials, greatly increasing the hot contact surface of the materials.
2.Features:
1.Large production capacity for continuous operation
2.Simple structure, low failure rate, low maintenance cost, convenient and stable operation
3.Wide applicability, suitable for drying powdered, granular, strip, and block materials, with large operational flexibility, allowing for large fluctuations in production without affecting product qualit
Post time: May-16-2024
